3D Remodeling    

Kitchen & Bath
Design Center

Home Up Kitchen Design Kitchen Cabinets Professional Discounts Baths       
                     

 

Up
Custom Storage
Bath Cabinets
Molding
Cabinet Options
Furniture
Areas Serviced
Warranty
Contact Info
Product Links
References
Whats New
Company Info
Free Estimate

 

Customer Log In

No Payments, No Interest for 6 Months*

KraftMaid has partnered with ABC’s Extreme Makeover Home Edition to provide Cabinetry built-to-order for these deserving families.

      

Order the Free Idea Book


How to Measure

National Kitchen & Bath Association

National Association of the Remodeling Industry


 

How to Measure

You've shopped and daydreamed over the magazines. You've visited web sites. You have taken the first steps toward your new superkitchen. Now you are ready to obtain some professional help in planning the kitchen you want. You may still not be sure how much you will need to invest in the various aspects of outfitting the kitchen or a solid idea of the probable cost range of the entire project.

It is time to begin the planning process by taking careful measurements of your existing kitchen.

Planning for a new home? Measurements provided by architectural plans are adequate for preliminary design layout and obtaining cost estimates. Final measurements must be taken of the actual structure before any orders can be placed.

Replacing existing kitchen PLUS adding or removing walls? Interview and select a recommended and competent professional kitchen designer, remodeler or architect to help you plan the space. (The professional may charge a fee for this service which may be deducted from any purchases you make through him/her.) This kind of professional should be able to provide a cost range for the completed job early in the design process allowing you to adjust the plans according to your budget requirements. The professional will take the required measurements and take responsibility for accuracy.

Replacing existing kitchen without adding or removing walls? This tutorial is for you! Taking and recording accurate measurements is extremely important for the success of your entire project. Here's how.

1. Begin by measuring the room wall-to-wall. (You will be recording all measurements in INCHES. (EX: 110", not 9' 2")
NOTE: Measure each wall at three locations; floor level, 48" from the floor and at ceiling level. Use the smallest dimension, and note variation on the chart. (EX: Floor level - 96", Center - 96 1/2", Ceiling - 96 3/4" Record as: 96" (variation at 48" is 1/2", variation at ceiling is 3/4"))

Record dimensions on a chart like this one.
 

  TOTAL DIMENSION (+ - variations)  
Wall #1    
Wall #2    
Wall #3    
Wall #4    

2. Make a rough drawing of the shape of the room. Represent each wall, door, window and any protrusions or recessed areas. This plan does NOT need to be 'to scale'. Print out a grid or do it free hand. Only accuracy counts, not talent!

3. Measure each wall section and record on the drawing. (A wall section is from one corner to a door way or window.) Measure each window and door and record.
NOTE: windows and doors are measured from outside edge to outside edge of casing or trim.

4. Add up all dimensions on each wall and verify that the total is equal to the total total wall dimension listed on the chart. (If not, re-measure!)

5. Locate the centerline of the sink, by measuring from one corner of the wall. Record this dimension on your rough drawing.

6. Measure from floor to ceiling at several locations. Record the smallest dimension in the body of the rough plan. (For vaulted ceilings, record smallest dimension at the point it occurs on the floor plan and record the greatest dimension at the point it occurs on the floor plan.)

7. If your kitchen has soffits (also known as bulkheads), measure their height and depth. Using a red pencil, indicate soffit location with dotted line. Record dimensions. (If you plan to remove or replace soffits, skip this step.)

8. Using a symbol, indicate location of each electrical outlet, switch or light fixture. Indicate the height from the floor and distance to nearest corner. (EX: $ 48" x 63" = Outlet $ = Switch = Fixture) This illustration shows these symbols indicating the location of electrical outlets, switches and fixtures. To avoid too much confusion on one plan, you may wish to do a separate drawing for this purpose.

Guide to Standard Kitchen Planning Dimensions
Everything you need to know to layout a basic floor plan for your Kitchen! Standard sizes of cabinets, appliances and sinks plus industry standards for the Work Triangle, countertop space for task areas. Print out the kitchen planning grid for entering your room measurements and your 'rough draft'.

Cabinetry is sized using the 3" increment system. While custom and semi-custom (built-to-order) cabinets may allow some 'odd dimension' modifications, using the 3" system will serve you well when working on your basic floor plan.

Ask a qualified kitchen design specialist to help you refine your basic plan before placing an order.
bulletDoes an island have a starring role in the kitchens of your dreams? Here is how to find out if an island will work for you.

Most appliances are standardized sizes, but a few, like microwaves are not. Always check appliance manufacturer's specifications to be sure you have allowed the correct amount of space for your final selection in each category!

bulletDishwashers - 24" wide (for installation in a cabinet, raising the height, allow 27")
bulletFree-standing and drop-in ranges - 3-" wide
bulletCook Tops - 30", 36" wide. (Some modular units available in 42" and 48" wide)
bulletWall Ovens - 27", 30", 36" wide. (Note: since wall ovens are always built-in, actual oven widths vary. The dimensions given here represent the cabinet sizes required.)
bulletRefrigerators - free-standing models, 30 - 36" wide. (Built-in models, up to 48" wide)
bulletTrash Compactors - 15" and 18" wide
bulletMicrowave Ovens - Varied

Sinks - Varied, but most are designed to fit in 30", 33" or 36" base cabinets. (Be sure to check manufacturer's specifications on your final selection!)

Guide to Standard Kitchen Planning Dimensions (2)

The National Kitchen and Bath Association (a trade organization for kitchen and bath dealers, designers, manufacturers, etc.) has established guidelines for kitchen planning. Prioritize the guidelines in case you cannot accomplish them all. Check them off as you complete your plan to be sure you have planned adequate space for each task area in your kitchen. Be sure to have a kitchen design specialist review your plan before ordering!

 

 
1a. Doorways at least 32" wide and not more than 24" deep in the direction of travel.
1b. Walkways at least 36" wide.
1c. Work aisles at least 42" wide for one-cook, at least 48" wide in multi-cook kitchens.
2. Work triangle 26' or less, with no single leg shorter than 4' nor longer than 9'.
3. No major traffic patterns should cross through the work triangle.
4. No entry, appliance or cabinet doors should interfere with one another.
5. In seating area, 36" of clearance from counter/table edge to wall/obstruction if no traffic passes behind seated diners. 65" clearance for walkway behind seated diners.
6. Kitchens under 150 sq. ft.: 144" of wall cabinet frontage with cabinets at least 12" deep, 30" high with adjustable shelving.
Kitchen over 150 sq. ft.: 186" wall cabinet frontage, with cabinets at least 12" deep, 30" high with adjustable shelving.
7. At least 60" of wall cabinet frontage with cabinets at least 12" deep, 30" high, included within 72" of the primary sink centerline.
8. Kitchens under 150 sq. ft.: 156" base cabinet frontage with cabinets at least 21" deep.
Kitchens over 150 sq. ft.: 192" base cabinet frontage with cabinets at least 21" deep.
9. Kitchens under 150 sq. ft.: at least 120" of drawer or roll-out shelf frontage.
Kitchens over 150 sq. ft.: at least 165" of drawer or roll-out shelf frontage.
10. At least five storage/organizing items located between 15" - 48" above the finished floor.
11. At least one functional corner storage unit should be included.
12. At least two waste receptacles should be included in the plan: one for garbage and one for recyclables.
13. Knee space should be planned below or adjacent to sinks, cooktops, ranges and ovens. This space should be a minimum of 27" high by 30" wide by 19" deep.
14. Clear floor space of 30" x 48" should be provided at the sink, dishwasher, cooktop, oven and refrigerator.
15. A minimum of 21" clear floor space should be allowed between the edge of the dishwasher and any object which is placed at a right angle to the dishwasher.
16. The edge of the primary dishwasher should be within 36" of the edge of one sink.
17. The primary sink should be located between or across from the cooking surface, preparation area or refrigerator.
18. At least 24" clearance between cooking surface and a protected surface above; or 30" clearance between cooking surface and an unprotected surface above.
19. All major appliances used for surface cooking should have a ventilation system, with a fan rated at minimum of 150 CFM.
20. Cooking surface not placed below an operable window unless window is 3" or more behind the appliance and more than 24" above it.
21. Microwave ovens placed so bottom is 24" to 48" above the floor.
22. At least two work counter heights: one at 28"-36" above the floor; and one at 36"-45" above the floor.
23. Kitchens under 150 sq. ft.: at least 132" of usable counter frontage.
Kitchens over 150 sq. ft.: at least 198" of usable counter frontage.
24. At least 24" counter frontage to one side of the primary sink and 18" on the other side. The 24" must be at the same height as the sink.
25. At least 3" countertop frontage on one side of secondary sink, 18" on the other side. The 18" must be at the same height as the sink.
26. At least 15" of landing space, minimum 16" deep, above, below or adjacent to microwave oven.
27. Open-ended kitchen: at least 9" counter space on one side of cooking surface and 15" on the other, at the same height as the appliance.
Enclosed kitchen: at least 3" of clearance space at an end wall protected by flame retardant material; 15" on the other side at the same counter height as the appliance.
28. At least 15" counter space on the latch side of the refrigerator or on either side of a side-by-side; or at least 15" counter space no more than 48" across from refrigerator.
29. At least 15" of landing space, minimum 16" deep, next to or above oven if it opens into a primary traffic pattern. If it does not open into traffic, 15" x 16" landing space needed.
30. 36" continuous countertop at least 16" deep for the preparation center. This center should be immediately next to a water source.
31. For two adjacent work centers, determine a minimum counter frontage: longest of the two required counter lengths and adding 12".
32. No two primary work center separated by a full-height, full-depth tall tower configuration.
33. Minimum clearances for seating areas:
  30" high table/counter: 30" w x 19" d table/counter for each seated diner with 19" clear knee space.
  36" high counter: 24" w x 15" d counter space for each seated diner with 15" clear knee space.
  42" high counter: 24" w x 12" d counter space for each seated diner with 12" of clear knee space.
34. Open counter corners should be clipped or radiused; eliminate sharp corners.
35. Controls, handles and door/drawer pulls operational with one hand.
36. Wall-mounted room controls 15" - 48" above the finished floor.
37. Ground fault circuit interrupters specified on all receptacles within the kitchen.
38. Fire extinguisher visibly located in the kitchen, away from cooking equipment and 15"-48" above floor.
39. Window/skylight area equals at least 10% of total square footage of kitchen or total living space which includes the kitchen.
40. Every work surface in the kitchen should be well illuminated by appropriate task and/or general lighting.

Storage Planning
Storage Planning Inventory Chart at superkitchens.com

It pays dividends to begin to plan your storage strategy well ahead of the kitchen floor plan/design process.

Take a careful inventory of all categories of items you now store in your kitchen. Go to storage planning chart.

Add to the list any items you hope to be able to add to kitchen storage that are currently being stored elsewhere.

tipIs Aunt Mattie's crystal packed away in the attic because you have no place for it? How about planning a wall cabinet or hutch with glass doors and shelves in your new kitchen where you can show it off?

Note the size of existing space being used to store each item on your inventory. If you need additional space for an item, note that, too. (Need more space for groceries so you can buy in larger sizes or quantity? Note that!)

Estimate the amount of space required to store those extra items not currently stored in your present kitchen but that you would like to store in your new one. (Approximately how much space will be required for Aunt Mattie's china?)

Note items that you would like to be able to store differently. Would it be more convenient to store an item in a drawer than on a shelf?

tipDeep drawers with full-extension runners make efficient storage for pots and pans and take less effort to access than roll-out shelves behind a door. Or how about a pantry planned for canned or boxed groceries, rather than storing them in wall cabinets?

Note functional features that might assist with accessibility or convenience.

tipBuilt-in cutlery divider or cutting board? How about an ironing board that neatly retracts into the space of a single drawer? A bread box or veggie bins that keep food items fresh longer? If you've dreamed it, note it on your inventory.)

Place your inventory in your Selections Journal/Project File. This will be a great resource when discussing your new kitchen with the kitchen planning specialist you select.

 


 

Food for thought for your new kitchen

Kitchen for Two Cooks  Cabinets Make the Kitchen Shine Frequently Asked Questions                             
Eight Steps to a Safe Kitchen            Cabinetry as Furnitures Furniture; A Wise Investment Kitchen Planning  

                                                              

Return to Home Page    

Kitchen & Bath
Design Center

eMail info@3dremodeling.com 

Members NKBA UNITED we STAND
111 Lindbergh Ave.  Suite D
Livermore, CA 94551
 

You are visitor: Hit Counter since October 2000

Log-In    

All Major Credit Cards
 
 
© Copyright 1996-1998,  All rights reserved. Reproduction without permission is strictly prohibited.
Last modified: January 30, 2008